Toyota Tundra Tonneau Cover
A Toyota Tundra tonneau cover in soft, hard folding or retractable, cut to the truck's bed and cab and composite-safe on the third-generation bed.
Toyota Tundra Tonneau Cover at a glance
- Soft roll-up tonneau
- $260–$560
- Soft tri-fold tonneau
- $350–$740
- Hard folding tonneau
- $560–$1,350
- Retractable cover
- $850–$1,800
Toyota Tundra tonneau cover for a full-size work truck
A Tundra works and tows, so its tonneau cover has to lock tools out of sight, keep a load dry and stay put at highway speed under a trailer's worth of wind. Because the third-generation truck uses a composite inner bed, the cover clamps with spreader plates and even pressure rather than the heavier bearing a steel bed takes. We cut the cover to the truck's bed and cab and set it to seal at the tailgate.
- Locks tools and keeps a towing truck's load dry
- Composite-safe clamps on the newer bed
- Cover cut to the Tundra's bed and cab
- Tailgate closed and sealed against the cover
Toyota Tundra tonneau cover fitment
Fitment starts with the generation, because the second-gen truck through 2021 and the third-gen truck from 2022 have different beds, and the composite bed on the newer truck needs composite-safe clamps. Then the cab, since a Double Cab and a CrewMax take different bed lengths. We confirm the year, cab and bed before ordering.
- Second generation 2007–2021 Tundra
- Third generation 2022 and newer Tundra
- Double Cab and CrewMax bed lengths
- Composite-safe clamps on the 2022-and-newer bed
- Bedliner thickness accounted for at the rails
- Tailgate closed and sealed against the cover
Tonneau cover styles for a Tundra
We carry a soft roll-up for flexibility, a soft tri-fold for price and access, a hard folding cover for security with most of the bed, and a retractable or one-piece for a sealed bed. On the composite bed we use spreader plates, and for a towing truck we favor a low-profile cover that stays quiet and aerodynamic with a trailer hooked.
- Soft roll-up for the most usable bed
- Soft tri-fold for price and quick access
- Toyota hard folding for security with most of the bed
- Toyota retractable or one-piece for a sealed, lockable bed
- Composite-safe clamps and spreader plates
How the Tundra tonneau cover is installed
Most Tundra covers clamp to the factory rails without drilling, and we seal the rails and set the composite-bed clamps to even pressure.
-
Confirm the generation, cab, bed and trim.
-
Clean the bed rails and check for a liner or composite panels.
-
Position the cover and its rails squarely.
-
Clamp with spreader plates and even pressure.
-
Seal the rails and check the tailgate seal.
-
Latch, open and close the cover several times.
-
Road-test for leaks, wind noise and rattles.
What a Toyota Tundra tonneau cover costs
A Tundra cover costs a little more than a mid-size cover because the bed is longer, and the figure varies with the generation, the cab and the style. A soft roll-up is the low end and a retractable hard cover is the top, so read each line as a range.
- Soft roll-up tonneau
- $260–$560 installed
- Soft tri-fold tonneau
- $350–$740
- Hard folding tonneau
- $560–$1,350
- Retractable cover
- $850–$1,800
Tacoma and Tundra cover parts and fitment details
- Soft roll-up covers for the Tacoma and Tundra beds
- Soft tri-fold covers for the Tacoma and Tundra at a fair price
- Hard folding covers for a lockable Toyota bed
- One-piece covers that seal the Toyota bed completely
- Retractable covers that roll into a canister over the Toyota bed
- Low-profile rails that keep the Toyota bed sides level
- Clamp-on rails sized to the Tacoma's deck rail and the Tundra's rails
- Rubber seals that keep rain and dust out of the Toyota bed
- A tailgate seal at the Toyota gate
- Tie-down cleats that work with the Tacoma's deck rail system
- Locks on Toyota hard covers with a matched key
- Gas struts that hold a Toyota folding cover open
- A footprint cut to the Tacoma's bed length and cab
- Cover lengths for the Tacoma's two beds and the Tundra CrewMax range
- A cover that clears a Toyota drop-in or spray-in bedliner
- Composite-safe clamps for the Tacoma's plastic-lined bed
- Rails that leave the Tacoma's deck rail tie-downs usable
- Rack-compatible rails for a Tacoma overland build
- A cover that suits a TRD trim or a bright Platinum
- A Toyota cover kept quiet on a lifted, trail-driven truck
- Latches that open easily from the Toyota tailgate
- A cover chosen for how a Toyota owner actually loads the bed
More for the Toyota Tundra
The other parts we fit on this truck.
-
Toyota Tundra Bull Bar
A Toyota Tundra bull bar matched to the generation and trim, sized to the full-size nose and finished for a work, TRD or Capstone truck, with the hooks and sensors left working.
$470–$890 varies by year, make and trim
-
Toyota Tundra Light Bar
A Toyota Tundra light bar for bumper, grille or roof positions, in spot, flood or combo beam, finished to suit the trim and wired clear of the truck's camera.
$280–$690 varies by year, make and trim
Fitment and cost guides
Plain answers before you order anything.
-
Camper Shell Fitment Guide
A camper shell fits when its base rail matches your truck's exact bed length, bed-rail height and cab, so a shell is ordered by year, cab and bed rather than by badge alone.
-
Tonneau Cover Fitment Guide
A tonneau cover fits when its rails and clamps match your truck's exact bed length and rail system, so a cover is ordered by year, cab and bed rather than by a size name.
-
Truck Accessory Costs
A single truck accessory in the Rio Grande Valley runs from about $260 for a soft tonneau cover to $3,800 for a painted camper shell, with most items landing between $400 and $1,500 installed.
-
What Fits My Truck
What fits your truck depends on its year, cab, bed length and trim, because two trucks with the same name can take different covers, shells, bars and lighting.
From the bay
Questions about this fit
Will a Tundra cover crack the composite bed?
No if it is clamped with even load and spreader plates, which is how we install on the 2022-and-newer bed. Over-tightening is what damages composite panels, so we set the clamps to a measured load.
Do 2nd and 3rd gen Tundra covers fit each other?
No, because the 2022 truck has a new bed. We confirm the generation first, then order a cover cut for that truck's bed length and cab so it seats and seals correctly.
Soft or hard cover for a towing Tundra?
A hard folding or retractable cover keeps the bed locked and dry without interfering with a trailer, and it stays low for aerodynamics. A soft roll-up suits a driver who loads tall cargo often.
Will a cover fit Double Cab and CrewMax Tundras?
Each cab takes its own bed length, so the cover length differs. We order to your cab and bed and check the tailgate closes against the cover.
How long does a Tundra cover install take?
A clamp-on cover is usually an hour or two, and one that needs rail drilling or wiring runs longer. We seal the rails and set the composite-bed clamps before handoff.
Can I add a rack over a Tundra cover?
Over a low-profile cover, yes, using rails that carry both. We check that the rack feet and the cover rails do not compete for the same bed-rail space.
Why Valley drivers bring their trucks here
- Accessories confirmed against your exact year, cab, bed and trim before ordering.
- A written estimate that separates the part, the hardware and the fitting.
- Fitting that seals, wires and torques to the truck's own mount points.
- A settling check after the first miles, because rail seals and clamps move.
Request a fitment check
Tell us the truck and what you want.