RAM 1500 Accessories
RAM 1500 accessories for the coil-sprung full-size pickup — tonneau covers, camper shells, bed rails, bull bars and lighting fitted to the bed length, cab, RamBox and multifunction tailgate.
RAM 1500 at a glance
- Soft roll-up tonneau, short bed
- $260–$590
- Hard tri-fold tonneau
- $590–$1,400
- Cab-high camper shell
- $1,800–$4,300
- Front bull bar or grille guard
- $480–$1,200
RAM 1500 accessories for the truck that rides like a car
The RAM 1500 earned its following with a coil-spring rear suspension that smooths the ride, and recent trucks added features that change the accessory game: a RamBox cargo management system built into the bed sides, a multifunction tailgate that splits and swings, and available air suspension that can raise and lower the truck. Each of those affects what fits. A cover has to leave the RamBox lids reachable; a rear seal has to clear the split tailgate; and a rack or bar has to respect the air suspension's travel. We fit around the features rather than over them.
- Coil-spring rear for a smoother ride than leaf springs
- RamBox storage built into the bed sides on many trucks
- Multifunction split tailgate on newer trucks
- Air suspension changes ride height and rack travel
What fits a RAM 1500
RAM demand is broad and skews practical, because the truck is bought for both work and comfort. These are the categories we fit most, each matched to the bed, cab and the truck's cargo features.
- RAM tonneau covers in soft roll-up, tri-fold and retractable
- RAM cab-high and mid-rise camper shells
- RamBox-compatible bed rails, dividers and cargo gear
- Bull bars, grille guards and push bars for the front
- Light bars and pods for the RAM bumper, grille and roof
- Running boards, mud flaps and towing accessories
RAM 1500 fitment by generation, bed, cab and bed features
The RAM 1500 is ordered by generation, then by bed and cab, then by whether the truck carries the RamBox or the multifunction tailgate, because those features change cover and rail fitment. The fifth-generation truck that arrived in 2019 sits on a different body from the fourth, and the two offer different bed lengths and cargo features, so we confirm all of it before quoting a part.
- Fourth generation 2009–2018 and fifth generation 2019 and newer
- Bed lengths of about five-and-a-half, six-and-a-half and eight feet
- Regular, Quad and Crew cab styles across the range
- RamBox present on some trucks, changing bed-rail fitment
- Multifunction split tailgate on many newer trucks
- Tradesman, Big Horn, Laramie, Rebel, Limited and TRX trims
Materials and options for the RAM's feature-rich bed
A RAM offers more built-in features than most trucks, so the accessory call is about complementing them. We favor covers that leave the RamBox lids free, racks that mount clear of the box, and finishes that match the trim, from work-truck matte to the bright accents on a Limited.
- Soft covers that keep the RamBox lids accessible
- Hard covers in finishes that match the trim
- Aluminium racks positioned clear of the RamBox
- Single- and dual-row LED bars for the RAM, spot and flood
- Spray-in and drop-in liners for a working bed
How a RAM 1500 accessory install works
We follow the same order on every RAM so the RamBox, the split tailgate and any air suspension keep working after the part is on.
-
Confirm the generation, bed, cab and bed features.
-
Inspect the bed rails, RamBox lids and tailgate.
-
Test-fit the RAM cover or shell before final torque.
-
Mount to the RAM's frame or bed points without blocking features.
-
Seal the RAM shell and wire any brake or bed light.
-
Confirm RamBox lids and the split tailgate still operate.
-
Road-test for leaks, wind noise and rattles.
What RAM 1500 accessories cost
RAM parts are widely available and priced competitively, but the truck is big and feature-rich, so a RamBox-compatible cover or a rack that clears the split tailgate can cost a little more. The total varies with the generation, bed, cab and cover or shell type, and pricing varies by year and trim, so read each figure as a range.
- Soft roll-up tonneau, short bed
- $260–$590 installed
- Hard tri-fold tonneau
- $590–$1,400
- Cab-high camper shell
- $1,800–$4,300
- Front bull bar or grille guard
- $480–$1,200
- Bumper or grille light bar with wiring
- $340–$1,050
Choosing a cover that leaves the RamBox usable
The RamBox is one of the RAM's best ideas: a pair of lockable, drainable storage compartments built into the bed walls, handy for tools, straps and cold drinks. A tonneau cover that clamps straight along the top of those walls can block the lids, turning a favorite feature into a nuisance. We select covers and rails engineered to clear the RamBox openings, so you keep the dry, locked bed and the side storage both working the way the truck's designers intended.
- Covers engineered to clear the RamBox lid openings
- Rails that mount without blocking the box lids
- Dividers and cargo gear that fit inside the RamBox
- A cover and bed features that coexist, not compete
Living with the RAM's split tailgate and air suspension
Newer RAMs add two more wrinkles: a multifunction tailgate that splits and swings, and an available air suspension that raises and lowers the truck. A cover's rear seal must clear the split gate in both its drop and swing, and a rack or bar must not foul the truck at either ride height. We test the tailgate through every position and check clearances at both suspension settings, so the clever hardware and your new parts get along.
- Rear seals that clear the split gate's drop and swing
- Rack and bar clearances checked at both ride heights
- Gate cycled through every position with the cover on
- Features tested together, never assumed to fit
RAM 1500 upgrades around the bed features
- RamBox-compatible covers that leave the lids reachable
- Split-tailgate-compatible rear seals for the multifunction gate
- Rack clearances checked at both air-suspension ride heights
- Short, standard and long bed cover options
- Mid-rise shells with a roof rated for a light rack
- Bed rails and cleats for cross-bed cargo
- Front bars with parking-sensor and camera clearance
- LED bars wired within the truck's charging budget
- Running boards rated for a lifted Rebel or a stock Big Horn
- Mud flaps shaped to the trim's wheel-well flares
- Hood deflectors that suit the generation's grille
- Under-seat lock boxes for a work crew's gear
- Bed extenders that gain length over the split gate
- Fifth-wheel and gooseneck prep for heavy towing
- RamBox dividers and liners for the side bins
- Cargo management that fits the factory bed channels
- Recovery points and shackle mounts for the front hooks
- Diff and underbody skid protection for trail use
- Tow mirrors and integrated trailer-brake wiring
- Seat covers built for a work truck's daily grind
RAM 1500: parts we fit
Confirm the exact part before you order.
-
RAM 1500 Bull Bar
A RAM 1500 bull bar matched to the generation and trim, in a finish that suits a work Tradesman or a bright Limited, with the tow hooks and front sensors kept working.
$480–$900 varies by year, make and trim
-
RAM 1500 Camper Shell
A RAM 1500 camper shell cut for the truck's bed and cab, clear of the RamBox and the split tailgate, wired for the brake light and rated for its roof load.
$1,800–$2,950 varies by year, make and trim
-
RAM 1500 Light Bar
A RAM 1500 light bar for bumper, grille or roof positions, in spot, flood or combo beam, finished to suit the trim and wired clear of the truck's camera and sensors.
$290–$700 varies by year, make and trim
-
RAM 1500 Tonneau Cover
A RAM 1500 tonneau cover cut to the truck's bed, clear of the RamBox bins and the split tailgate, in soft, hard folding or retractable.
$260–$590 varies by year, make and trim
Fitment and cost guides
Plain answers before you order anything.
-
Camper Shell Fitment Guide
A camper shell fits when its base rail matches your truck's exact bed length, bed-rail height and cab, so a shell is ordered by year, cab and bed rather than by badge alone.
-
Tonneau Cover Fitment Guide
A tonneau cover fits when its rails and clamps match your truck's exact bed length and rail system, so a cover is ordered by year, cab and bed rather than by a size name.
-
Truck Accessory Costs
A single truck accessory in the Rio Grande Valley runs from about $260 for a soft tonneau cover to $3,800 for a painted camper shell, with most items landing between $400 and $1,500 installed.
-
What Fits My Truck
What fits your truck depends on its year, cab, bed length and trim, because two trucks with the same name can take different covers, shells, bars and lighting.
From the bay
Questions from the counter
Will a tonneau cover work with the RAMBox?
Yes, if it is engineered to clear the box lids. We pick covers and rails that mount without blocking the RamBox openings, so you keep the dry locked bed and the side storage both usable.
Will a cover fit the RAM's multifunction split tailgate?
It needs a rear seal that clears the gate in both the drop and the swing. We fit covers designed around the split gate and cycle it through every position with the cover on before releasing the truck.
Do 4th and 5th gen RAM accessories interchange?
Mostly no, because the 2019 truck moved to a new body with different beds and features. We confirm the generation first, then order parts built for that truck's bed and tailgate.
Can you fit a rack on a RAM with air suspension?
Yes, and we check clearances at both ride heights so the rack never fouls the body. The air suspension's travel is the thing to respect, and we test it before handoff.
What bed lengths does a RAM 1500 offer?
About five-and-a-half, six-and-a-half and eight feet, varying by cab. We confirm the exact length from your truck, because the cover, shell and liner are all cut to it.
How much does a RAM 1500 camper shell cost?
A cab-high shell runs in the high four figures installed, and a long bed or a feature-rich truck sits above that. The figure varies by year, cab, bed and trim, so we quote your build.
Will a bull bar block RAM front sensors?
It can on newer trucks with parking sensors and cameras. We choose a bar designed to clear them and recalibrate if needed, so the driver aids keep working after the install.
How long does a RAM cover install take?
A clamp-on cover is usually an hour or two, and one that needs rail drilling or brake-light wiring runs longer. We seal the rails and check the RamBox lids and split gate before the truck leaves.
Why Valley drivers bring their trucks here
- Accessories confirmed against your exact year, cab, bed and trim before ordering.
- A written estimate that separates the part, the hardware and the fitting.
- Fitting that seals, wires and torques to the truck's own mount points.
- A settling check after the first miles, because rail seals and clamps move.
Request a fitment check
Tell us the truck and what you want.